High temperature resistant single high power voice coil self-adhesive enamelled wire with complete specifications and 180 ℃ withstand voltage rating
Classification of self-adhesive enamelled wire
Thermoplasticity: 1. Solvent type 2. Hot air type 3. Energized type
thermosetting
Epoxy type
1. When the customer needs to use enamelled wire as Grade B, we provide Grade F products and meet the requirements of Grade B.
2. When the color of enamelled wire is pure copper, no color identification is required.
3. When the conductor material is pure copper, no identification is omitted.
4. General model: QAN, QZN, PE, EI, AIW
Product introduction
1. UEW can be dyed, usually red, green, blue and black
2. Heating temperature: the recommended temperature for enamelled wire test. During the winding process, when the specification is ≤ 0.050mm, the temperature of the axle fixture is 170-210 ℃, and when the specification is ＞ 0.050mm, the temperature of the axle fixture is 190-260 ℃;
3. SV type products are first processed with solvent and then baked in an oven for at least 30 minutes at 200 ℃;
4. ◎ Preferential suggestion for collocation, ○ Secondary suggestion for collocation.
explain
1. Reference standards: IEC60317, JIS C 3202, NEMA, etc;
2. What we have listed are some typical specifications and parameters, which can be customized according to customers' special requirements
Product model: HBUEW, QAN FF (R), QAN H (C), etc
Temperature resistance grade: 155 ℃, 180 ℃
Insulation type: AIW, EIW, PEW, UEWH-T, UEW-H, UEW-F
Product application: bank card, ID card, vibration motor, linear motor, vcm, hollow coil for motor, wireless charging coil, receiver, high output coil, high temperature resistant voice coil, high power voice coil.
Enamelled wire refers to the metal wire, also known as electromagnetic wire, which uses insulating paint as insulating coating and is used to wind electromagnetic coils. It is a main type of winding wire, consisting of conductor and insulating layer. The bare wire is annealed and softened, then painted and baked for many times. However, it is not easy to produce products that meet both the standard requirements and the customer's requirements. It is affected by the quality of raw materials, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of various enamelled wires are different, but they all have four major properties: mechanical, chemical, electrical and thermal properties
